OPERATION
Before first use
- Remove all packaging materials, labels and/or stickers from your kettle.
- Clean your kettle thoroughly before using for the first time (Cleaning).
- Boil water at least 2 times and dispose, before boiling water for consumption.
- Remove the kettle from the base).
- Take off the lid.
- Fill the kettle with water
- After filling the kettle with water, insert the lid into kettle with holes facing towards handle.
- Connect the power plug to a wall outlet.
- Press down the I/0 switch to on position to start boiling the water.
- The indicator light lights up. After boiling is finished, the kettle turns off automatically. Dispose of the hot water in the sink.
WARNING: Be careful when handling hot water. Danger of scalding!
Let the appliance cool down 1 minute before boiling water again. Repeat this process before using water for consumption.
WARNING: Do not immerse the base or the kettle in water or any liquids. This may cause electric shock or damage the appliance.
Operating instructions
Before plugging the kettle into the wall outlet, check that the electrical circuit is not overloaded with other appliances.
- Set the base on a flat, even and steady surface.
- Remove the kettle from the base.
- Take off the lid.
- Fill the kettle with water under the max 1.0 marking.
- Do not fill over the max marking. See the water level for adding the desired amount of water.
- Connect the power plug to a wall outlet.
- Press down the I/0 switch to on position to start boiling the water. The indicator light lights up.
- After boiling is finished, the kettle turns off automatically. Let the appliance cool down 1 minute before boiling water again.
- Pour the hot water into a heat resistant container.
- Manually interrupt the boiling process by lifting up the I/0 switch to off position.
- After each use remove the power plug from the wall outlet.
WARNING: The appliance is very hot during use. Do not touch. Danger of burns!
WARNING: Never leave the kettle unattended while boiling water. Especially when there are children nearby.
WARNING: Do not open the lid while boiling water.
CLEANING
- Clean the kettle regularly. This appliance contains no user serviceable parts and requires little maintenance. Leave any servicing or repairs to qualified personnel.
- Clean the outside of the base and the kettle with a damp soft cloth.
- Clean the inside of the kettle with dishwasher detergent and rinse thoroughly with water.
- Do not use abrasive cleansers.
- After cleaning dry the kettle and the base thoroughly.
WARNING: Never immerse the kettle or the base in water or other liquids.
DECALCIFYING
- Fill the kettle with a vinegar and water mixture (½ vinegar and ½ water) up to the max 1.0 mark.
- Open lid and pour water into the kettle.
- Close the lid and place the kettle on the base.
- Insert power plug into a standard 120 V AC wall outlet. Press down the I/0 switch on/off to start boiling the water.
- Run through the complete brewing cycle with the decalcifying solution and repeat 3 times.
- After decalcifying, run through 2 complete boiling cycles with clear water.
- Clean the kettle afterwards (Cleaning).
STORAGE
- Clean and dry all parts before storing. Store the kettle in its box or in a clean, dry place.
- Never wrap the power cord around the kettle. Always use the cord storage on the bottom of the base.
